• 16 Bit, 8086 Microprocessor Training System  HiQ-86

HiQ-86 is a 16 Bit Microprocessor Training system based on 8086 processor. This trainer is extremely useful for beginners, self learners, class room teaching,  training and development purposes. The  EPROM resident monitor programs, Serial Driver etc., .and the onboard LCD & Keyboard  enables  the user to edit, debug, exam./modify the  register & memory contents. The execution of programs may be done by single step/full speed in  stand alone and PC mode operation. The Trainer has a built-in RS 232C Serial Port By which it can be connected to a PC and the HEX files can be download to the onboard RAM. The Windows based software comes with this trainer, supports the Assembler, program download, trace function, display the register & memory contents, dump and execution of programs in a single step and full speed mode.

Specifications:

Optional Accessories :

PPI Application Modules: DC motor, Stepper motor, DOT matrix, 16-segment, 7-segment, traffic lights, elevator, RTC, Keyboard, ADC, DAC, LCD, Temperature,
Level meter, Logic controller &  Relay input/output PPI Study cards for :  8255, 8251, 8253, 8279 & 8259

• Advanced 8086 Microprocessor Training System  HiQ-86A

HiQ-86A is an Advanced  16 Bit Microprocessor Training System based around the
Popular Intel  8086 processor. This trainer is extremely useful for beginners, self learners, class room teaching, training and development purposes. The HiQ86A is an advanced version of HiQ86, comes  with an on-board ADC, DAC, Stepper motor, DOT matrix, Level meter, Speaker, 3nos. non maskable  interrupts (NMI) are provided by an on board push button key switches for monitor software interface etc., . 

The EPROM resident monitor programs, Serial Driver etc., .and the onboard LCD & Keyboard  enables  the user to edit, debug, exam./modify the  register & memory contents. The execution of programs may be done by single step/full speed in  stand alone and PC mode operation.

The Trainer has a built-in RS 232C Serial Port By which it can be connected to a PC and the HEX files can be downloaded to the onboard RAM. The Windows based software comes with this trainer, supports the Assembler, program download, trace function, display the register & memory contents, dump and execution of programs in a single step and full speed mode.

Specifications :

Optional Accessories :

PPI Application Modules: DC motor, Stepper motor, DOT matrix, 16-segment, 7-segment, traffic lights, elevator, RTC, Keyboard, ADC, DAC, LCD, Temperature,
Level meter, Logic controller &  Relay input/output

• An Advanced 8051 Microcontroller Training System  HiQ-51A

HiQ-51A is an 8 Bit Microcontroller Training system  based on 8051 family microcontroller. This trainer is an extremely useful for beginners, self learners, class room teaching, training and development purposes. The HiQ-51A is an advanced version of HiQ-51, comes with an on-board applications ADC, DAC, DC motor, Stepper motor, 89c51 programmer, 8x8 DOT matrix, 4nos. LED and speaker. 

The  EPROM resident monitor programs, Serial Driver etc., .and the onboard LCD & Keyboard  enables  the user to edit, debug, exam./modify the  register & memory contents.

The execution of programs may be done by single step/full speed in  stand alone and PC mode operation. The Trainer has a built-in RS 232C Serial Port By which it can be connected to a host PC and the HEX files can be downloaded to the onboard RAM.

The Windows based software comes with this trainer, supports the Assembler, Compiler,
Debugger,  program download, trace function, display the register & memory of Internal and external memory of CPU, display and execution of programs in a single step and full speed mode.

Specifications:

Optional Accessories :

PPI Application Modules: DC motor, Stepper motor, DOT matrix, 16-segment, 7-segment, traffic lights, elevator, RTC, Keyboard, ADC, DAC, LCD, Temperature,
Level meter, Logic controller &  Relay input/output

PPI Study cards for :  8255, 8251, 8253, 8279 & 8259

• Peripheral Interface Study cards:

The peripheral interface study cards are compatible with HiQ make 8bit/16bit  series of  microprocessor and microcontroller training kits. These study cards have been designed to study about peripheral chips commonly used with microprocessors/
microcontrollers.All peripheral studys cards can be connected through 50pin FRC cable.

1. 8259 Programmable Interrupt controller  Study Card
2. 8253 & 8251 Programmble Timer/counter and Asynchronous &Synchronous controller study card

1. 8279 Programmable keyboard and display controller study card
2. 8255 Programmable parallel Interface controller study card

Hi-Q after revision of stand alone, low cost, vendor dependant FPGA-CPLD Development board, has come up Universal programmable logic development system with a modular architecture in the industry-standard factor. It is a power full hardware development system that delivers the flexibility and easy-of-use necessary for rapid prototype development. The universal concept provides support for all Altera/Xilinx/Atmel/Actel/Lattice/Cypress etc. Devices available in the 144-pin TQPF package, 208-pin PQFP and PLCC packages.

FEATURES:

• Supports stand-alone or embedded operation.
• Accommodates 1.8V, 2.5V, 3.3V and 5V devices.
• Configuration via Passive serial, Join Test Action Group(JTAG).
• Up to 140 user definable input output pins available.
• Wide range of applications specific interfacing modules.
• Microcontroller interface facility.
• Auto device detection and identification facility.
• More than 30 experiments with circuit diagram to experience with VHDL and Verilog  programming.
• Demonstration/Evaluation sample with user friendly manual.
• Low cost and fast delivery.

TECHNICAL SPECIFICATIONS:

• Provided different clock frequencies (2, 10 and 16MHz) and upgradeable  up to 66MHz.
• On board different supply levels generated to match multi volt FPGA/CPLD devices (1.8V, 2.5V, 3.3V and 5V).
• Female FRC connector 4 nos provided for piggy back connection of FPGA/CPLD devices.
• FPGA/CPLD of different makes XILINX/ALTERA/ATMEL/ACTEL/LATTICE etc.
• FPGA/CPLD of different series of ALTER like Acex, Apex, Flex, Max, are supported.
• Supports up to a maximum of 160K gate density.
• Downloading through parallel port of the PC.
• FPGA configuration facility through SPROM/ FLASH-ROM.
• User selectable configuration modes using jumper settings.
• RS-232 serial interface facility with 9-pin D-type connector for communicating to the PC for UART applications.
• Dual line 16 characters LCD module interface.
• Provided 3X4 matrix key pad for loading numerical data.
• Provided 6 nos of 7-segment LED displays for counting applications.
• Provide on-board 7 nos LED for general purpose.
• Provided On-board buzzer for sound applications.
• Global reset switch.
• One 8-input DIP switch provided for applying inputs.
• Facility to drive the device board through external; clock frequency.
• All I/O lines(60) are taken out through FRC connectors.
• Power ON indication of multiple voltages through LEDs.
• Provided different programming methods for XILINX and ALTERA FPGAs.

INTERFACING MODULES:

• 7-segment display module.
• PS2 key pad module.
• RS-232 & RS485 interface module.
• LCD display interface module.
• External ADC and DAC interface module.
• Stepper and DC motor control interface module.
• Matrix display interface module.
• Logical input/output interface module.
• General purpose feature interface module

• 8Bit, 8051 Microcontroller Training System  HiQ-51

HiQ-51 is an 8 Bit Microcontroller Training system  based on 8051 family microcontroller. This trainer is an extremely useful for beginners, self learners, class room teaching,  training and development purposes. The  EPROM resident monitor programs, Serial Driver etc., .and the onboard LCD & Keyboard  enables  the user to edit, debug, exam./modify the  register & memory contents.

The execution of programs may be done by single step/full speed in  stand alone and PC mode operation. The Trainer has a built-in RS 232C Serial Port By which it can be connected to a PC and the HEX files can be downloaded to the onboard RAM.

The Windows based software comes with this trainer, supports the Assembler, Compiler,
Debugger,  program download, trace function, display the register & memory contents, dump and execution of programs in a single step and full speed mode.

Specifications :

Optional Accessories :

PPI Application Modules: DC motor, Stepper motor, DOT matrix, 16-segment, 7-segment, traffic lights, elevator, RTC, Keyboard, ADC, DAC, LCD, Temperature,
Level meter, Logic controller &  Relay input/output

Programmer Interface for 89c51 and 8751uC

PPI Study cards for :  8255, 8251, 8253, 8279 & 8259

• Hardware  Interface Modules:

The HiQ interface modules covering wide range of applications from simple switch and lamp input/output through to more complex closed loop and open loop systems. They are compatible with HiQ 8bit & 16bit microprocessor and microcontroller training systems. All Microprocessor/Microcontroller training kits can be connected
To these modules through 26 pin FRC cable.

1)  8Bit  ADC Interface module
2)  8Bit DAC Interface module
3)  Logic controller Interface module
4)  Traffic Lights Interface module
5)  RTC Interface module
6)  DC motor Interface module
7)  Stepper Motor Interface module
     (Stepper motor controller card, 12v/5v, 3kg-cm torque Stepper motor
     and Power supply included)
8)  Elevator Interface module
9)  16x1 line LCD display Interface module
10)Keyboard Interface module
11)7-Segment display Interface module
12)16-Segment display Interface module
13)8x8 DOT matrix display interface module
14)Bar graph Interface module
15)12bit, ADC Interface module
16)Temperature Interface module
     (Temperature controller card, Temperature simulator kit and
      power supply included)
17)Programmer to program 87c51 & 89c51uC